ACCO Brands M01180 Manual Do Utilizador

8

9

Charge your KeyFolio before initial use or when the Charging Indicator   blinks green.
1  Insert the small end of the Charging Cable into the micro USB Charging Connector on 

the Keyboard.

2  Insert the other end of the Charging Cable into your iPad charger.

3  Plug your iPad charger into a working outlet. The Charging Indicator Light    

glows red.

4  When the Keyboard is fully charged, the Charging Indicator Light turns off.

Try the following in sequence. You can stop when the problem is fixed.
1  Make sure you have installed and set up Bluetooth correctly on your iPad. Check the 

documentation that came with your iPad for instructions.

2  Make sure that the Keyboard is within range of your iPad. Maximum Bluetooth range is 

about 10 meters/33 feet.

3  If your iPad is connected to other Bluetooth devices, you may need to disconnect some 

devices before you can connect to the Keyboard.

4  If you changed any Bluetooth settings on your iPad, try connecting the Keyboard to 

your iPad again.

5  Make sure that both your iPad battery and the Keyboard battery are sufficiently 

charged.

If this does not solve the problem, please contact Kensington Support at kensington.com.

Technical support is available to all registered users of Kensington products. Technical 

Support contact information can be found on the back page of this manual.