ACCO Brands M01180 Manual Do Utilizador

10

11

Web Support
You may find the answer to your problem in the Frequently Asked Questions (FAQ) section 

of the Support area on the Kensington Website: www.support.kensington.com.
Telephone Support 
There is no charge for technical support except long-distance charges where applicable. 

Please visit www.kensington.com for telephone support hours. In Europe, technical 

support is available by telephone Monday to Friday 09:00 to 21:00 (Central European time). 
Please note the following when calling support:
•  Call from a phone where you have access to your device.
•  Be prepared to provide the following information:

–  Name, address, and telephone number

–  Name of the Kensington product

–  Make and model of your computer

–  System software and version

–  Symptoms of the problem and what led to them

•

Do not modify, disassemble, open, drop, crush, puncture, or shred the KeyFolio.

•

The KeyFolio contains a lithium-polymer battery, which is flammable. Keep away from open flame.

•

To prevent short circuit or other potential hazards, prevent metal objects such as coins or keys from
coming into contact with the KeyFolio, and do not insert foreign objects into the KeyFolio or its
ports.

•

Keep your KeyFolio dry, and do not use with wet hands. Moisture in or on the KeyFolio may lead to
electrical shock. If exposed to moisture during use, unplug the KeyFolio immediately. If your 
KeyFolio gets wet, have a qualified technician evaluate the product’s safety before resuming use.

•

Your KeyFolio may become warm during operation. This is normal. However, to prevent
overheating, keep area around KeyFolio ventilated and do not place anything on or around KeyFolio 
during operation. Do not operate your KeyFolio near a heat source, heat vent, or in direct sunlight. 
Your KeyFolio should be used in temperatures between 50–80°F (10–27°C).

•

If the KeyFolio begins to swell or expand, emits a strong odor, or becomes hot to the touch,
discontinue use of the KeyFolio, and have the product examined by a qualified electronic technician.

•

Inspect your KeyFolio and cables for damage before use. Have any damaged part repaired or
replaced before use.

•

Your KeyFolio is not user serviceable. Do not attempt to open, modify, or repair.

•

If the battery inside the KeyFolio leaks for any reason, discontinue use, and do not allow the
KeyFolio’s contents to contact your skin or eyes. In the event of accidental contact wash the 
affected area with large amounts of water and seek medical attention immediately.

•

Your KeyFolio is not a toy. Keep them away from children. Insure that all persons who use this product
read and follow these warnings and instructions.

•

Do not leave the KeyFolio on prolonged charge when not in use.

•

Do not store your KeyFolio either fully charged or discharged. It is best to store your KeyFolio with
at least 30 % charge remaining. To check the charge level of your KeyFolio press the battery 
indicator button.

•

Avoid frequent full discharges because this puts additional strain on the battery in the KeyFolio.
Charge your KeyFolio between uses even if it is not fully discharged. The lithium-polymer battery 
used in this product has no “memory effect.” Therefore, several partial discharges with frequent 
recharges are better than one full discharge, and will help prolong the life of your KeyFolio. Short 
battery life in laptops is mainly caused by heat, rather than charge/discharge patterns.

•

Do not store your KeyFolio at elevated temperatures (such as in your car) or in high humidity.

•  Do not incinerate or dispose of your KeyFolio in a fire or microwave.
•

Do not dispose of your KeyFolio as ordinary refuse, as it contains a lithium-polymer battery.
Consult your local municipal or civil authority for instructions on correctly disposing of a 
lithium-polymer battery.

•

In the USA and Canada: This mark

  indicates your KeyFolio can be recycled by the Rechargeable 

Battery Recovery Corporation (“RBRC”). When you are ready to dispose of the KeyFolio, please 
contact the RBRC at 1-800-8-BATTERY or www.rbrc.org.

This device complies with Industry Canada licence-exempt RSS standard(s). 
1. Operation is subject to the following two conditions:

(1) this device may not cause interference, and  
(2) this device must accept any interference, including interference that may cause undesired operation of the device."

2. Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage
, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement."

Operation is subject to the following two conditions:

(1) this device may not cause interference, and  
(2) this device must accept any interference, including interference that may cause undesired operation of the device."

2. Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to omply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:

-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. 
The device can be used in portable exposure condition without RF striction.

FCC Radiation Exposure Statement: 

1. This device complies with Part 15 of the FCC Rules.

CE DECLARATION OF CONFORMITY
Kensington declares that this product is in compliance with the essential requirements and other relevant provisions 

of applicable EC directives. For Europe, a copy of the Declaration of Conformity for this product may be obtained by 

clicking on the Compliance Documentation link at www.support.kensington.com.