Climax Technology Co Ltd HPGWG5DT16 Manual Do Utilizador
21
5.3. Learn Rule
You can enter the sensor RF code or ZigBee MAC address manually to assign area and zone
number to this sensor. Sensors learned with pre-assigned rule will be put under the area and
zone number you specified. This function does not work with Z-Wave devices and DECT device.
number to this sensor. Sensors learned with pre-assigned rule will be put under the area and
zone number you specified. This function does not work with Z-Wave devices and DECT device.
Step 1. Click
Learn Rule.
Step 2. You will see the Add Learn Rule menu.
Step 3. Select
Area and Zone number for this device.
Step 4. Select
RF or ZigBee.
Step 5.
Key in the RF code or ZigBee MAC info
Step 6.
For ZigBee device, select a ZigBee Device Type
Step 7.
Enter a preferred name for sensor (up to 31 letters or numbers).
Step 8.
Press “OK” to save.
Step 9.
If the process is successful, the screen will display “Updated Successfully.” You can
then check, edit or delete the rule under the Learn Rule menu.
Step 10 Repeat the steps to add more rules.