Arris 3387W Manual Do Utilizador
222
If you enter 100 for the
lines
argument, the command line
inter face displays information as an uninterrupted stream
(which is useful for capturing information to a text file).
(which is useful for capturing information to a text file).
Port Renumbering Settings
If you use NAT pinholes to for ward HTTP or telnet traffic through
your Cayman Gateway to an internal host, you must change the
por t numbers the Cayman Gateway uses for its own configura-
tion traffic. For example, if you set up a NAT pinhole to for ward
network traffic on Por t 80 (HTTP) to another host, you would
have to tell the Cayman Gateway to listen for configuration con-
nection requests on a por t number other than 80, such as
6080.
your Cayman Gateway to an internal host, you must change the
por t numbers the Cayman Gateway uses for its own configura-
tion traffic. For example, if you set up a NAT pinhole to for ward
network traffic on Por t 80 (HTTP) to another host, you would
have to tell the Cayman Gateway to listen for configuration con-
nection requests on a por t number other than 80, such as
6080.
After you have changed the por t numbers the Cayman Gateway
uses for its configuration traffic, you must use those por t num-
bers instead of the standard numbers when configuring the Cay-
man Gateway. For example, if you move the router's Web
ser vice to por t “6080” on a box with a DNS name of “super-
box”, you would enter the URL
uses for its configuration traffic, you must use those por t num-
bers instead of the standard numbers when configuring the Cay-
man Gateway. For example, if you move the router's Web
ser vice to por t “6080” on a box with a DNS name of “super-
box”, you would enter the URL
http://superbox:6080 in a Web
browser to open the Cayman Gateway graphical user inter face.
Similarly, you would have to configure your telnet application to
use the appropriate por t when opening a configuration connec-
tion to your Cayman Gateway.
Similarly, you would have to configure your telnet application to
use the appropriate por t when opening a configuration connec-
tion to your Cayman Gateway.
set servers web-http [ 0 - 65534 ]
Specifies the por t number for HTTP (web) communication with
the Cayman Gateway. Because por t numbers in the range 0-
1024 are used by other protocols, you should use numbers in
the range 2000-65534 when assigning new por t numbers to
the Cayman Gateway web configuration inter face. A setting of
the Cayman Gateway. Because por t numbers in the range 0-
1024 are used by other protocols, you should use numbers in
the range 2000-65534 when assigning new por t numbers to
the Cayman Gateway web configuration inter face. A setting of
0
(zero) will turn the ser ver off.