Arris 3387W Manual Do Utilizador
223
CONFIG Commands
set servers telnet-tcp [ 0 - 65534 ]
Specifies the por t number for telnet (CLI) communication with
the Cayman Gateway. Because por t numbers in the range 0-
1024 are used by other protocols, you should use numbers in
the range 2000-65534 when assigning new por t numbers to
the Cayman Gateway telnet configuration inter face. A setting of
the Cayman Gateway. Because por t numbers in the range 0-
1024 are used by other protocols, you should use numbers in
the range 2000-65534 when assigning new por t numbers to
the Cayman Gateway telnet configuration inter face. A setting of
0
(zero) will turn the ser ver off.
☛
NOTE:
You cannot specify a por t setting of
0
(zero) for both
the web and telnet por ts at the same time. This
would prevent you from accessing to the Gateway.
would prevent you from accessing to the Gateway.
Security Settings
Security settings include the Firewall and IPSec parameters. All
of the security functionality is keyed.
of the security functionality is keyed.
Firewall Settings (for BreakWater Firewall)
set security firewall option [ ClearSailing | SilentRunning |
LANdLocked ]
LANdLocked ]
The 3 settings for BreakWater are discussed in detail on page