Tait International Limited TBCK4B Manual Do Utilizador
DRAFT 4
94
Replacing Modules
TB9400 Installation and Operation Manual
© Tait Electronics Limited September 2011
8.1
Saving the
Base Station
’s Configuration
Before replacing a module in the
base station
, you should decide whether
you need to save its configuration data. If you are unsure whether you have
a record of the configuration, backup and save the configuration file before
removing any modules. Once you have replaced the module, you will be
able to restore the original configuration to the
a record of the configuration, backup and save the configuration file before
removing any modules. Once you have replaced the module, you will be
able to restore the original configuration to the
base station
.
If one or more of the modules is faulty, you may be unable to save the
configuration. In this case, you will have to restore the configuration from a
back-up file. Refer to the Help for more information.
configuration. In this case, you will have to restore the configuration from a
back-up file. Refer to the Help for more information.