Tait International Limited TBCK4B Manual Do Utilizador
DRAFT 4
TB9400 Installation and Operation Manual
Replacing Modules
93
© Tait Electronics Limited September 2011
8
Replacing Modules
Caution
The 100 W PA and PMU weigh between 9.3 lb
(4.2 kg) and 15.4 lb (7 kg) each. Take care when hand-
ling these modules to avoid personal injury.
(4.2 kg) and 15.4 lb (7 kg) each. Take care when hand-
ling these modules to avoid personal injury.
Important
The cooling fans are mounted on the front panel and will
only operate when the panel is fitted correctly to the front
of the subrack. To ensure adequate airflow through the
only operate when the panel is fitted correctly to the front
of the subrack. To ensure adequate airflow through the
base
station
, do not operate it for more than a few minutes with
the front panel removed (e.g. for servicing purposes). Both
the PMU and PA modules have built-in protection mech-
anisms to prevent damage from overheating.
the PMU and PA modules have built-in protection mech-
anisms to prevent damage from overheating.