N. V. Nederlandsche Apparatenfabriek NEDAP ADRRFMD Manual Do Utilizador

Page 

 of 

37

59

Manual iSense Lumen series

Every Power Inserter: around the Ethernet cable, both at the OUT and IN port.

Every Renos unit: around the Ethernet cable and the RFID coaxial cable (when used), both at the OUT

and IN port.

Every 9 m (30 ft.) for longer Ethernet cables.

To save yourself a huge amount of frustration, please first place the filters 

 attaching the

connectors. The other way around is not possible. Many have tried before.

Filters can be ordered as spare part with Nedap. Please refer to the Nedap Retail Portal for more

information.

The filters that are close to a Renos unit should be placed inside the foot of the gate. If there are multiple

filters in the electronics are of the gate, they should be tied together.

Ethernet cables

Connect the Ethernet cable from the OUT port with the IN port of the next Renos unit

First, in all aisles connect the Ethernet OUT port with the IN port of the next Renos unit, always following the

directions of the arrows in the cabling indicated by the image below.

Please make sure to test every Ethernet cable for correct connections and twisting of all 4 pairs (8

wires) with an Ethernet cable tester. This is to make sure that the system can function correctly.