N. V. Nederlandsche Apparatenfabriek NEDAP ADRRFRFID Manual Do Utilizador

Page 

 of 

46

59

Manual iSense Lumen series

Firmware over-write Local - complete system flash

Download the correct firmware image file from the Nedap Retail portal (

). Enter the

overwrite version

configuration wizard and accept all Renos units in the system that should be updated. Press the Advanced

button and follow the steps to change the firmware. One of these steps is to upload the firmware image file.

Please note that when using 'local - complete system flash' firmware change, all settings and

configuration of the system are lost.

It's only possible to execute this on-site and not remotely, as the system needs to be re-configured

before it is usable again.

Firmware update - complete system update (firmware version 16.30

and higher)

Download the correct firmware image file from the Nedap Retail portal (

). Enter the

update image

configuration wizard and accept all Renos units in the system that should be updated. Press the Advanced

button and follow the steps to update the firmware.

Firmware update via Device Management

To update the firmware via Device Management, please make sure the system is configured, delivered and

connected to the Device Management service. Then, navigate to the Device Management website and use the

functionality there to initiate the firmware update.