N. V. Nederlandsche Apparatenfabriek NEDAP SENSITEPL Manual Do Utilizador
SENSIT SYSTEM | MANUAL
SENSIT System
10/92
2.2.3 SENSIT SURFACE MOUNT
Vehicle detection sensor designed for car parks where
drilling is not allowed or non-permanent mounting is
required. The unit is suitable for indoor car parks and
rooftop parking’s. The sensor can easily be glued onto
the surface. Replacement can be achieved by removing
the sensor installed in the mounting ring. The SENSIT
Surface Mount is featured with dual detection technology (infrared and earth-magnetic
field).
drilling is not allowed or non-permanent mounting is
required. The unit is suitable for indoor car parks and
rooftop parking’s. The sensor can easily be glued onto
the surface. Replacement can be achieved by removing
the sensor installed in the mounting ring. The SENSIT
Surface Mount is featured with dual detection technology (infrared and earth-magnetic
field).
SENSIT Surface Mount
Operating
frequency
frequency
SENSIT SURFACE MOUNT EU: 868.2 MHz
SENSIT SURFACE MOUNT CN: 868.2 MHz
SENSIT SURFACE MOUNT US: 902-928 MHz (FHSS)
SENSIT SURFACE MOUNT AU: 915-927 MHz (FHSS)
SENSIT SURFACE MOUNT CN: 868.2 MHz
SENSIT SURFACE MOUNT US: 902-928 MHz (FHSS)
SENSIT SURFACE MOUNT AU: 915-927 MHz (FHSS)
Detection
Magnetic and IR
Accuracy: 98%
Load resistance
Regular traffic
Mounting
On the floor surface
Weight
455 gram
(16.05 oz)
Dimensions
Mounting ring:
Ø 240
(9.45 inch)
Sensor:
Ø 167 cm
(6.57 inch)
Height:
35mm
(1.38 inch)
Color
Sensor black and yellow (optional black) ring
Detection height
0…90 cm
(0 … 35.5 inch)
Protection
IP67, completely sealed housing PE
Operating
temperature
temperature
-40 ... +85°C
(-40°F … +185°F)
Power supply
Built in Lithium batteries expected lifetime of 5-9 years *
Antenna
Included
* U
nder normal circumstances and dependent on settings.