N. V. Nederlandsche Apparatenfabriek NEDAP SENSITEPL Manual Do Utilizador
SENSIT SYSTEM | MANUAL
Frequently Asked Questions
83/92
15.9 SENSIT INTERFACE SOFTWARE (SIS)
What is the SIS?
The SIS (SENSIT Interface Software) allows for easy configuration and filtering of event
messages received by the Data Collectors. The SIS enables configuration, installation, basic
administration and integration of the SENSIT system SIS functionality includes;
The SIS (SENSIT Interface Software) allows for easy configuration and filtering of event
messages received by the Data Collectors. The SIS enables configuration, installation, basic
administration and integration of the SENSIT system SIS functionality includes;
Easy integration via SOAP or REST
Easy remote support via web interface
DNNP (Dynamic Node Numbering Protocol)
Connection of multiple Data Collectors
Filtering of events
Easy event configuration
Easy management of the entire Wireless SENSIT Network
Automatic calibration
Debug and analyze tool
Automatic collection of missing messages
Configuration of parking bays
Stand-alone system with control of display per zone.
Graphics to indicate parking spaces and overstay
Why use a SIS?
Configuration and integration of the data from the SENSIT system becomes much easier.
The site can be accessed remotely allowing Nedap to give you better support on the
installation.
Can I control a display with the SIS?
Yes using a wireless display node built-into a display, the display can become part of the
Wireless SENSIT Network (WSN). You can set in the SIS software which parking zone the
display should control and indicate. See chapter 13.6.7 for more information. Using this
option a simple standalone application could be created with displays indicating available
spaces. No more than 2 wireless displays are allowed in the WSN to make sure the display
messages aren’t influencing the WSN too much.
Configuration and integration of the data from the SENSIT system becomes much easier.
The site can be accessed remotely allowing Nedap to give you better support on the
installation.
Can I control a display with the SIS?
Yes using a wireless display node built-into a display, the display can become part of the
Wireless SENSIT Network (WSN). You can set in the SIS software which parking zone the
display should control and indicate. See chapter 13.6.7 for more information. Using this
option a simple standalone application could be created with displays indicating available
spaces. No more than 2 wireless displays are allowed in the WSN to make sure the display
messages aren’t influencing the WSN too much.