Harman International Industries Inc ESQUIRE Manual Do Utilizador

1.  Read these instructions.
2.  Keep these instructions.
3.  Heed all warnings.
4.  Follow all instructions.
5.  Do not use this apparatus near water.
6.  Clean only with a dry cloth.
7.  Do not block any ventilation openings. 

Install this apparatus in accordance with 

the manufacturer’s instructions.

8.  Do not install this apparatus near any heat 

sources such as radiators, heat registers, 

stoves or other apparatus (including 

amplifiers) that produce heat.

9.  Do not defeat the safety purpose of 

the polarized or grounding-type plug. A 

polarized plug has two blades with one 

wider than the other. A grounding-type 

plug has two blades and a third grounding 

prong. The wide blade or the third prong 

is provided for your safety. If the provided 

plug does not fit into your outlet, consult an 

electrician for replacement of the obsolete 

outlet.

10.  Protect the power cord from being walked 

on or pinched, particularly at plugs, 

convenience receptacles and the point 

where they exit from the apparatus.

11.  Use only attachments/accessories specified 

by the manufacturer.

12.  Use only with the cart, stand, 

tripod, bracket or table 

specified by the manufacturer 

or sold with the apparatus. 

When a cart is used, use caution when 

moving the cart/apparatus combination to 

avoid injury from tip-over.

13.  Unplug this apparatus during lightning 

storms or when unused for long periods 

of time.

14.  Refer all servicing to qualified service 

personnel. Servicing is required when the 

apparatus has been damaged in any way, 

such as when the power-supply cord or 

plug is damaged, liquid has been spilled or 

objects have fallen into the apparatus, or 

the apparatus has been exposed to rain or 

moisture, does not operate normally or has 

been dropped.

15.  Do not expose this apparatus to dripping or 

splashing, and ensure that no objects filled 

with liquids, such as vases, are placed on 

the apparatus.

16.  To disconnect this apparatus from the AC 

mains completely, disconnect the power-

supply cord plug from the AC receptacle.

17.  The mains plug of the power-supply cord 

shall remain readily operable.

18.  Do not expose batteries to excessive heat 

such as sunshine, fire or the like.

RISK OF ELECTRIC SHOCK. DO NOT OPEN.

THE LIGHTNING FLASH WITH AN ARROWHEAD 
SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, 
IS INTENDED TO ALERT THE USER TO THE 
PRESENCE OF UNINSULATED “DANGEROUS 
VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE 
THAT MAY BE OF SUFFICIENT MAGNITUDE TO 
CONSTITUTE A RISK OF ELECTRIC SHOCK TO 
PERSONS.

THE EXCLAMATION POINT WITHIN AN 
EQUILATERAL TRIANGLE IS INTENDED TO 
ALERT THE USER TO THE PRESENCE OF 
IMPORTANT OPERATING AND MAINTENANCE 
(SERVICING) INSTRUCTIONS IN THE LITERATURE 
ACCOMPANYING THE PRODUCT.

WARNING: TO REDUCE THE RISK OF FIRE 
OR ELECTRIC SHOCK, DO NOT EXPOSE THIS 
APPARATUS TO RAIN OR MOISTURE.

CAUTION

This device complies with part 15 of the FCC Rules. Op-

eration is subject to the following two conditions: (1) This 

device may not cause harmful interference, and (2) this 

device must accept any interference received, including 

interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian 

ICES-003.
Cet appareil numérique de la classe B est conforme à la 

norme NMB-003 du Canada. 

This equipment has been tested and found to comply with 

the limits for a Class B digital device, pursuant to Part 

15 of the FCC Rules. These limits are designed to pro-

vide reasonable protection against harmful interference 

in a residential installation. This equipment generates, 

uses and can radiate radio frequency energy and, if not 

installed and used in accordance with the instructions, 

may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not 

occur in a particular installation. If this equipment does 

cause harmful interference to radio or television recep-

tion, which can be determined by turning the equipment 

off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase  the  separation  between  the  equipment  and 

receiver.

•  Connect the equipment into an outlet on a circuit differ-

ent from that to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV techni-

cian for help.

Caution:  Changes or modifications not expressly ap-

proved by HARMAN could void the user’s authority to op-

erate the equipment.

FCC AND IC INFORMATION FOR USERS
This device complies with Part 15 of the FCC rules and 

Industry Canada license-exempt RSS 210. Operation is 

subject to the following two conditions: (1) This device 

may not cause harmful interference; and (2) this device 

must accept any interference received, including interfer-

ence that may cause undesired operation. 

-

If an outside antenna or cable system is connected to 

this product, be certain that it is grounded so as to pro-

vide some protection against voltage surges and static 

charges. Section 810 of the National Electrical Code 

(NEC), ANSI/NFPA No. 70-1984, provides information with 

respect to proper grounding of the mast and supporting 

structure, grounding of the lead-in wire to an antenna dis-

charge unit, size of grounding conductors, location of an-

tenna discharge unit, connection to grounding electrodes 

and requirements of the grounding electrode. 

This reminder is provided to call the CATV (cable TV) 

system installer’s attention to article 820-40 of the NEC, 

which provides guidelines for proper grounding and, in 

particular, specifies that the cable ground shall be con-

nected to the grounding system of the building, as close 

to the point of cable entry as possible.

IMPORTANT SAFETY INSTRUCTIONS