Telrad Networks Ltd COMPACT23X Manual Do Utilizador

Chapter 3 - Operation and AdministrationBS Menu

Chapter 3: Operation and Administration

BS Menu

BreezeCOMPACT System Manual

BreezeCOMPACT System Manual

In the current release, a Single and Dual BS is supported. The BS menu enables you to create the BS, update the BS 

parameters or delete the BS. The BS ID LSB of an existing BS cannot be modified. To change the BS ID LSB, you must 

delete the BS and re-create it.

The BS menu includes three options:



: For creating a new BS.





Show Summary: For viewing the main BS parameters.

Select the Add option to create the BS. If the BS does not already exist, it must be created. In the current release, a single or 

dual BS can be defined. 

After completing the configuration of all BS mandatory parameters, reset the unit to apply the change.

You are prompted to configure the BS parameters described below.

In the current release, only BS Number 1 can be created.

The unique identifier of the BS in the network. Must be unique in the entire Radio Access Network. A number in the range 

1–16777215. The BS ID LSB used in the system is in the format A.B.C, where A, B and C are from 0 to 255. The BS ID 

used in the Monitor program is an integer that is calculated by the formula A*65536+B*256+C. For example, a BS ID of 

1.2.5 is translated to 1*65536+2*256+5=66053.

The unique identifier of the wireless network operator. The same Operator ID must be used by all BSs in the managed 

wireless network. A number in the range 1–16777215 (same definition principle as for BS ID LSB).

BS parameters should be configured according to the recommendations of the Radio Network Planning.