Bosch Security Systems Inc. M513 Manual Do Utilizador
CON TROLS and CON NEC TIONS
FRONT PANEL ( Re fer to Fig ure 3)
Power ON/OFF Switch:Push this switch once
toturn power ON; push it again to turn the
power OFF.
toturn power ON; push it again to turn the
power OFF.
Power ON In di ca tor: The Power ON In di ca -
tor is il lu mi nated when the Power ON/OFF
Switch is pushed in the ON Po si tion.
tor is il lu mi nated when the Power ON/OFF
Switch is pushed in the ON Po si tion.
Lo cal Head set Con nec tor: 4 Pin XLR Con -
nec tor for In put/Out put. The head set jack will
ac cept many Telex model head sets. Com pat i ble
with other in ter com head sets with four pin
XLR con nec tors that are wired as shown in
Fig ure 2.
nec tor for In put/Out put. The head set jack will
ac cept many Telex model head sets. Com pat i ble
with other in ter com head sets with four pin
XLR con nec tors that are wired as shown in
Fig ure 2.
Fig ure
2
Head set XLR Con nec tor Wiring
Lo cal Head set Vol ume: Ad justs vol ume to
Lo cal Head set.DOES NOT AF FECT MI -
CRO PHONE GAIN.
Lo cal Head set.DOES NOT AF FECT MI -
CRO PHONE GAIN.
Mic On-Push-to-Talk/Lock-to-Talk Switch:
En ables the lo cal head set mi cro phone au dio
func tion.
En ables the lo cal head set mi cro phone au dio
func tion.
NOTE: DOES NOT con trol base sta tion RF
trans mit.
trans mit.
Lo cal Push-to-Talk In di ca tor: Will be il lu mi -
nated when ever the talk func tion is on.
nated when ever the talk func tion is on.
Lo cal Mi cro phone Gain Con trol and
Overmodulation In di ca tor: A screw driver
ad just able con trol is pro vided to con trol the in -
put level of the lo cal head set mic. This in put is
pro tected from over loads by means of a gain
com pres sor whose op er a tion is sig naled by the
gain LED in di ca tor.
Overmodulation In di ca tor: A screw driver
ad just able con trol is pro vided to con trol the in -
put level of the lo cal head set mic. This in put is
pro tected from over loads by means of a gain
com pres sor whose op er a tion is sig naled by the
gain LED in di ca tor.
Por ta ble En able Switches and In di ca tors:
When in the “IN” po si tion, the En able switches
al low the user of the cor re spond ing por ta ble
unit to be heard by oth ers con nected to the sys -
tem. When in the “OUT” po si tion, the re spec -
tive por ta ble will be muted, but this por ta ble
will still be able to hear all other se lected
remotes and in ter faces. The in di ca tors nor -
mally show the pres ence of a por ta ble trans -
ceiver in use on the chan nel cor re spond ing to
that in di ca tor.
When in the “IN” po si tion, the En able switches
al low the user of the cor re spond ing por ta ble
unit to be heard by oth ers con nected to the sys -
tem. When in the “OUT” po si tion, the re spec -
tive por ta ble will be muted, but this por ta ble
will still be able to hear all other se lected
remotes and in ter faces. The in di ca tors nor -
mally show the pres ence of a por ta ble trans -
ceiver in use on the chan nel cor re spond ing to
that in di ca tor.
-5-