Kastle Systems International AIO-W Manual Do Utilizador
All In One Reader User Manual
The All In One reader is a RFID proximity card and Bluetooth reader for
Kastle access control systems. It is intended to be used in conjunction with
an interface board BLE Daughter Board which piggy backs on to a KZDM
or KZSRDR Board.
Kastle access control systems. It is intended to be used in conjunction with
an interface board BLE Daughter Board which piggy backs on to a KZDM
or KZSRDR Board.
Notes on Use:
- Operating Temp: 0-49 degrees C
- Must use 22 AWG or larger with a wire run no longer than 2000 ft
- All
- Must use 22 AWG or larger with a wire run no longer than 2000 ft
- All
Wiring shall be in accordance with the National Electrical Code,
ANSI/NFPA 70
-
The Reader is to be mounted in a protected premise
- Power to be supplied from KZDM, KZSRDR or UL 294 or UL 603 Listed power
supply
- No connection to reader shield per transient test setup