LEXIN ELECTRONICS INC LXFT4 Manual Do Utilizador
19
6.4. Do not attempt to open the LX-FT4 case.
6.5. Do not drop or knock the device. Rough handling can break internal circuit boards and fine
mechanics.
6.6. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
6.7. Do not paint the device. Paint can clog the moving parts and prevent proper operation.
These suggestions apply equally to the headset main unit, speaker-microphone clamp unit, and
power charger.
7. Certification and Safety Approvals
• FCC Compliance Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
• FCC Compliance Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
• RF Exposure Information
FCC RF Exposure requirements: The highest SAR value reported under this standard during
product certification for use next to the head with the minimum separation distance of 0mm is
1.291 W/Kg. This transmitter must not be collocated or operating in conjunction with any other
antenna or transmitter.
This product is compliance to FCC RF Exposure requirements and refers to FCC website
search for FCC ID: 2ARGO-LXFT4
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject