ICOM 297000 Manual Do Utilizador

VFO settings, including MENU group’s contents such as sub-
audible tone frequency, offset, can be programmed into a
memory channel.

q Set the desired frequency in the desired band

(left or right)

➥ Push the desired band’s [V/MHz•SCAN] to select VFO

mode.

➥ Set the frequency using the same band’s [DIAL].

➥ Set other data

(e.g. tone frequency, duplex information, etc.)

if required.

w Push and hold the same band’s [M/CALL•MW] for 1 sec.

• 2 beeps sound
• “X” indicator and the memory channel number blink.

e Rotate the [DIAL] to select the memory channel to be pro-

grammed.

• Memory channels not yet programmed are blank.

r Push and hold the same band’s [M/CALL•MW] for 1 sec.

to program.

• 3 beeps sound
• Memory channel number automatically increases when contin-

uing to push [M/CALL•MW] after programming.

✔CONVENIENT
Memory programming can be performed in versatile ways
e.g. memory channel to the same (or different) memory chan-
nel, memory channel to the call channel, etc.

MEMORY OPERATION

■ Programming a memory channel

[EXAMPLE]: Programming 145.870 MHz into memory channel 20 (blank channel) via the controller.

Push

Rotate for setting frequency, etc.

Push and hold for 1 sec.

Rotate

Push and hold for 1 sec. and continue to push

➠

Beep

“

V/MHz

SCAN

M/CALL

Beep

“

Beep

“