ICOM 297000 Manual Do Utilizador

D Programming a memory channel via the microphone

The microphone can also be used to program mem-

ory channels.

z Set the desired frequency in VFO mode.

➥ Push [VFO/LOCK] to select VFO mode.

➥ Set the frequency using the keypad.

➥ Set other data

(e.g. offset frequency, duplex direction, sub-

audible tone encoder ON/OFF and its frequency)

, if neces-

sary.

x Push [MR/CALL] to enter memory mode.
c Push [

ENT

C(T-OFF)], then set the desired memory chan-

nel using the keypad.

v Push [VFO/LOCK] to select VFO mode.
b Push [FUNC] then push and hold [

CLR

A(MW)] for 1 sec. to

program.
➥ 3 beeps may sound and the VFO contents

(including the

subaudible tone frequency, etc.)

are programmed.

➥ Memory channel number increases when continuing to

push [

CLR

A(MW)] after programming.

MEMORY OPERATION

[EXAMPLE]: Programming 145.870 MHz into memory channel 20 (blank channel) via the microphone.

Beep

“

Beep

“

Beep

“

Push ,

Push then for 1 sec. and continue to push

➠

MR/

CALL

Push then

Push