ICOM 301500 Manual Do Utilizador

35

N Operating CW

q  Connect a paddle or straight key as on page 18.

w  Push and hold 

 for 1 sec., then push a 

band key to select the desired band.

e  Push 

 to select CW mode.

 • 

 

After CW mode is selected, push and hold 

 for 

1 sec. to toggle between CW and CW-R modes.

r  Rotate [DIAL] to tune in a desired signal with the 

desired tone frequency.

 • 

 

The S-meter indicates received signal strength when 
signal is received.

t  Rotate the [AF] control to set audio to a comfort-

able listening level.

y  Set CW break-in operation and the CW delay time 

in the set mode. (p. 79)

q  Push and hold 

 for 1 sec. twice to enter 

the set mode.

w  Rotate [M-CH] to select “BK-IN” to set the CW 

break-in operation.

e  Rotate [DIAL] to select the CW break-in opera-

tion from full break-in, semi break-in or OFF.

 

• FL  : full break-in

 

• SE  : semi break-in

 

• OF :  break-in OFF

r  Rotate [M-CH] to select “BK-DELAY” to select 

the CW delay time when semi break-in operation 
is selected in step 

e.

t  Rotate [DIAL] to set the desired delay time.

u  Continue to set the keyer settings in the set mode, 

if necessary. (p. 80)

i  Push 

 to exit the set mode and return to 

normal operation.

o  Keying to transmit, use the electric keyer, paddle or 

straight key to send your CW signals.

 • 

“

” appears.

 • 

 

The Po meter indicates transmitted CW signal strength.

!0 Stop keying to return to receive.

Band keys

“CW” or “CW-R” appears.

Appears while transmitting.

Appears when semi break-in is selected.

4

RECEIVE AND TRANSMIT