ICOM 325300 Manual Do Utilizador
N Scan resume condition
D Scan pause timer
The scan pauses when receiving signals according to the
scan pause time. It can be set from 2 to 20 seconds or un-
limited.
scan pause time. It can be set from 2 to 20 seconds or un-
limited.
q Push [SET] to enter the Set mode.
w Rotate [DIAL] to select the scan pause timer item.
e Rotate [VOL] to select a desired scan pausing time from
2–20 seconds (2 seconds steps) or “HOLd.”
• “2”–“20” : Scan pauses for 2–20 seconds while receiving a sig-
nal.
• “HOLd”
: Scan pauses on a received a signal until it disap-
pears.
rPush [V/M/C] to return to the frequency display.
D Scan resume timer
The scan restarts after the signal disappears according to the
resume time. It can be set from 0–5 seconds or unlimited.
resume time. It can be set from 0–5 seconds or unlimited.
q Push [SET] to enter the Set mode.
w Rotate [DIAL] to select the scan pause timer item.
e Rotate [VOL] to select a desired scan resume time from
0–5 seconds (1 second steps) or “HOLd.”
• “0”
: Scan restarts immediately after the signal disap-
pears.
• “1”–“5”
: Scan restarts 1–5 seconds after the signal disap-
pears.
• “HOLd”
: Scan remains paused on the received signal accord-
ing to the scan pause timer even if it disappears. Ro-
tate [DIAL] to resume manually.
tate [DIAL] to resume manually.
rPush [V/M/C] to return to the frequency display.
Scan resume timer must be set shorter than the scan
pause timer, otherwise this timer does not activate.
pause timer, otherwise this timer does not activate.
47
7
SCAN OPERATION