ICOM IC-M602 Manual Do Utilizador
8
3
BASIC OPERATION
■ Channel selection
◊ Channel 16
Channel 16 is the distress and safety channel. It is used for
establishing initial contact with another station and for emer-
gency communications. Channel 16 is monitored during both
dualwatch and tri-watch. While standing by, you must monitor
channel 16.
➥Push [16•9] momentarily to select channel 16.
➥Push [CH/WX•U/I/C] to return to the condition before se-
establishing initial contact with another station and for emer-
gency communications. Channel 16 is monitored during both
dualwatch and tri-watch. While standing by, you must monitor
channel 16.
➥Push [16•9] momentarily to select channel 16.
➥Push [CH/WX•U/I/C] to return to the condition before se-
lecting channel 16, or rotate [CHANNEL] to select operat-
ing channel.
ing channel.
◊ Channel 9 (Call channel)
Each regular channel group has a separate leisure-use call
channel. The call channel is monitored during tri-watch. The
call channels can be programmed (p. 11) and are used to
store your most often used channels in each channel group
for quick recall.
➥Push [16•9] for 1 sec. to select the call channel of the se-
channel. The call channel is monitored during tri-watch. The
call channels can be programmed (p. 11) and are used to
store your most often used channels in each channel group
for quick recall.
➥Push [16•9] for 1 sec. to select the call channel of the se-
lected channel group.
• “CALL” and call channel number appear.
• Each channel group may have an independent call channel after
• Each channel group may have an independent call channel after
changing a call channel.
➥Push [CH/WX•U/I/C] to return to the condition before se-
lecting call channel
,
or rotate [CHANNEL] to select operat-
ing channel.
Push for
1 sec.
1 sec.
9
16
BUSY
-
25W
---
INT
---
CALL
LOCAL--DUP
SCRAM--
TAG
NORMAL-SCAN
-
34"34.206N
123"23.236W
--
UTC
-
10:10
--
CALLING
Push
9
16
BUSY
-
25W
---
INT
---CALL
LOCAL--DUP
SCRAM--
TAG
NORMAL-SCAN
-
34"34.206N
123"23.236W
--
UTC
-
10:10
--
CALLING