Supermicro CSE-733T-450/B Manual Do Utilizador

UPER SC733 Chassis Installation Guide

Removing the Front Chassis Cover and
Accessing the Control Panel

(Unless you need to access the control panel's circuit board or the

floppy drive, we do not recommend removing the front cover.)

P r o c e d u r e

1. Remove the side cover from the chassis (refer to Section B).

2. Lift the two tabs inside the lip located at the bottom of the front cover.

3. Using a flat screw driver, gently pry open the front cover.

4. Once one side of the front cover is loose, pull the front cover completely

out of the chassis as shown in Figure B.

5. You can also remove the control panel's circuit board by removing the

screw that fastens the control panel to the chassis.

Control panel

Lift the two tabs

Gently ply open the front cover

(SC733i)

Remove the screw

Remove the front cover

Figure A

Figure B