EMW Co. Ltd BHA-WN400 Manual Do Utilizador

３. SETUP

1) MODULE NO : User can change the module by using [-, +] button.

2) PICONET ID : User can change the ID by using [-, +] button.

This ID is used for establishing wireless connection and it is chageable. But the ID

must match IP Camera’s ID in order to establishing the succesful wireless connection.

3) FREQUENCY : Selectable from 2.4GHz, 5.8GHz, and 2.4/5.8GHz.

4) Channel : Selectable from AUTO, MANUAL

AUTO : Automatically allocated to the channels.

MANUAL : Manually allocated to the channels.

5) RF POWER : User can set the RF power of the module.

Low power settings are suggested when the distance from IP Camera to NVR is

close and High power settings are suggested when the distance from IP Camera to

NVR is far.

6) ENCRYPTION : User can choose whether the wireless signal transmission will use

encryption feature or not. Enabling this feature may decrease the wireless transmission

rate by a little.

7) CHANNEL AVOIDANCE : User can choose whether the wireless signal transmission will use

channel avoidance feature or not.

If the channel setting is on “Manual”, this feature will not be enabled.

8) MODULE REBOOT : NVR forces the wireless module to reboot by clicking this button.