Cisco Aironet 1410 Wireless Bridge AIR-BR1410A-E-K9 Manual Do Utilizador

Códigos do produto
AIR-BR1410A-E-K9
Página de 12
2
Release Notes for Cisco Aironet 1410 Bridges for Cisco IOS Release 12.3(4)JA
OL-7095-01
Introduction
Introduction
The Cisco Aironet 1400 Series Bridge is a wireless device designed for building-to-building wireless
connectivity. Operating in the 5.8-GHz UNII 3 band (5725 to 5825 MHz), derived from the 802.11a
standard, the bridge delivers 6 to 54 Mbps data rates without the need for a license. The bridge is a
self-contained unit designed for outdoor installations, providing differing antenna gains as well as
coverage patterns and supports both point-to-point and point-to-multipoint configurations.
The bridge uses a browser-based management system, but you can also configure the bridge using the
command-line interface (CLI) through a Telnet session, Cisco IOS commands, or Simple Network
Management Protocol (SNMP).
System Requirements
You can install Cisco IOS Release 12.3(4)JA on all 1400 series bridges.
Finding the Software Version
To find the version of Cisco IOS software running on your bridge, use a Telnet session to log into the
bridge and enter the show version EXEC command. This example shows command output from a bridge
running Cisco IOS Release 12.2(13)JA2:
bridge> show version
Cisco Internetwork Operating System Software
IOS (tm) C1410 Software (C1410-K9W7-M), Version 12.2(13)JA2
Copyright (c) 1986-2003 by Cisco Systems, Inc.
You can also find the software version on the System Software Version page in the bridge’s web-browser
interface.
Upgrading to a New Software Release
For instructions on installing bridge software:
1.
Follow this link to the Cisco Aironet documentation home page:
2.
Follow this path to the product, document, and chapter:
Aironet 1400 Series Wireless LAN Products > Cisco Aironet 1400 Series Bridge > Cisco
Aironet 1400 Series Bridge Software Configuration Guide > Managing Firmware and
Configurations > Working with Software Images
3.
Click this link to browse to the Cisco IOS Software Center on Cisco.com:
Log into Cisco.com to use the Cisco IOS Upgrade Planner.