Cisco Aironet 1410 Wireless Bridge AIR-BR1410A-E-K9 Manual Do Utilizador
Códigos do produto
AIR-BR1410A-E-K9
5
Release Notes for Cisco Aironet 1410 Bridges for Cisco IOS Release 12.3(4)JA
OL-7095-01
Important Notes
Bridge Power Up LED Colors
During power up the bridge LEDs display the following color sequences:
1.
The Install LED is initially turned off.
2.
The Install LED turns amber.
3.
The Status LED turns amber during the boot loader process.
4.
The Ethernet, Status, and Radio LEDs turn green during the loading of the operating system.
5.
The Ethernet, Status, and Radio LEDs turn amber during the loop-back test.
6.
The Status LED starts to blink green then the Ethernet LED starts to blink green.
7.
The Ethernet, Status, and Radio LEDs blink amber twice to indicate that the auto install process has
started.
started.
8.
During the auto install process, the Ethernet, Status, and Radio LEDs turn off for a short time period
then go through a blinking sequence twice. Each LED sequentially blinks at the following rates
before becoming continuously amber:
then go through a blinking sequence twice. Each LED sequentially blinks at the following rates
before becoming continuously amber:
a.
Slow blinking rate of 1 blink per second.
b.
Medium blinking rate of 2 blinks per second.
c.
Fast blinking rate of 4 blinks per second.
9.
The Install LED starts to blink amber to indicate that the bridge is searching for a root bridge.
10.
When the bridge associates to a root bridge, the Install LED turns amber.
11.
When the bridge becomes a root bridge and is waiting for a non-root bridge to associate, the Install
LED blinks green.
LED blinks green.
12.
When the root bridge has a non-root bridge associated, the Install LED turns green.
Bridge Cannot Detect Simultaneous Image Downloads
Do not attempt to load software images into the bridge from both a Telnet session and console session
simultaneously. The bridge cannot detect that two images are being loaded at the same time. For best
results, use the archive download command in the CLI.
simultaneously. The bridge cannot detect that two images are being loaded at the same time. For best
results, use the archive download command in the CLI.
Bridge Cannot Detect Invalid Software When Using copy Command
The bridge sometimes cannot detect invalid software images when you load software using the copy
command. For best results, use the archive download command in the CLI to load new software.
command. For best results, use the archive download command in the CLI to load new software.
Telnet Session Sometimes Hangs or Will Not Start During Heavy Traffic
When the bridge is transmitting and receiving heavy traffic, you sometimes cannot start a Telnet session
and some existing Telnet sessions freeze or hang. However, this behavior is expected because the bridge
gives top priority to data traffic and a lower priority to Telnet traffic.
and some existing Telnet sessions freeze or hang. However, this behavior is expected because the bridge
gives top priority to data traffic and a lower priority to Telnet traffic.