Honeywell VCU-04 Manual Do Utilizador

13

: For satisfactory RF reader performance, you should install the 

Voyager device as far as possible from electrical conducting and metal 

surfaces. If you install the device on a metal surface, the reading 

performance will be affected. For a good performance, install the reader at 

least 5 cm away from the metal surface.

All the connections are on the back of the reader inside the round area. 

Figure 1 Connectors layout

J1

POE & Ethernet interface

RJ45 Female Connector

P4

Output interface

5Pin,--3.5MM pitch, Header connector

P5

TAMPER Switch interface 2Pin,--2.5MM Pitch, Header connector

P6

RS-485 communication 
interface

3Pin,--2.5MM Pitch, Header connector