Apollo America Inc 51000305 Manual Do Utilizador

Attention:   This manual should be read prior to use and retained for further 
information.

GENERAL INFORMATION
The Wireless Carbon Monoxide Alarm is a 3V battery powered wireless 
detector intended for use with a compatible wireless alarm system. The 
detector consists of an electrochemical carbon monoxide sensor assembly 
coupled to a wireless transmitter. The Wireless Carbon Monoxide Alarm 
communicates with the control panel and can send alarm, tamper and 
battery condition messages to the system’s receiver. Refer to the wireless 
system’s instruction for the maximum number of transmitters that can be 
supported.
IMPORTANT: This detector must be tested and maintained regularly 
following NFPA 720 requirements.
This device is designed to protect individuals from the acute effects of 
carbon monoxide exposure. It will not fully safeguard individuals with 
specific medical conditions. If in doubt consult a medical practitioner.



This product is intended for use in ordinary 

 residential areas. It is 

not designed to measure compliance with Occupational Safety & Health 
Administration (OSHA) commercial and industrial standards.
Contents of box:

•  Wireless Carbon Monoxide Alarm with base
•  Installation guide
•  Pack of screws and anchors
•  Labels as appropriate
•  1 CR123A Panasonic battery