Ningbo WinHi Electronics&Technology Co. Ltd EYE-BT-00001 Manual Do Utilizador

 

Stereo Bluetooth Transmitter   

User Manual 

1. Picture: 

                       

 

2. Specification 

Chip: CSR BC57E687C 

Version: V3.0 

Protocols: A2DP 2.0 

Instruction light: red light, bule light 

Input Voltage: 5V 

Supply Current: 30-50mA 

 

3. Working Mode 

After power on, the BT transmitter will turned on automatically, and pairing the last bluetooth 

receiver(the blue light will be flashing). If the pairing is not connected within 10 seconds, it will 

automatically enter pairing state (red and blue lights will be flashing cross). 

If the BT transmitter is successfully connected with bluetooth receiver , blue light will be on. 

If the BT transmitter connected with a not matchable device, it will automatically disconnect and 

enter pairing status. If there is no connection within five minutes, the transmitter will enter 

standby mode, and blue light flashes slowly. 

4. Name of device 

This model of bluetooth transmitter can only connected with device which is named “Music Flow 

H3”. If the former 13 characters of the bluetooth receiver name is same as “Music Flow H3”, the 

2 device can connect successfully.If any of the first 13 characters is not the same, the connection 

will be failed. 

If you need to connect with other names of devices, you have to modify the name of bluetooth 

transmitter, which shoud be same as receiver device. If the receiver name is more than 13 

characters, letters after 13 characters will be negligible.