Ningbo WinHi Electronics&Technology Co. Ltd EYE-BT-00001 用户手册
Stereo Bluetooth Transmitter
User Manual
1. Picture:
2. Specification
Chip: CSR BC57E687C
Version: V3.0
Protocols: A2DP 2.0
Instruction light: red light, bule light
Input Voltage: 5V
Supply Current: 30-50mA
3. Working Mode
After power on, the BT transmitter will turned on automatically, and pairing the last bluetooth
receiver(the blue light will be flashing). If the pairing is not connected within 10 seconds, it will
automatically enter pairing state (red and blue lights will be flashing cross).
If the BT transmitter is successfully connected with bluetooth receiver , blue light will be on.
If the BT transmitter connected with a not matchable device, it will automatically disconnect and
enter pairing status. If there is no connection within five minutes, the transmitter will enter
standby mode, and blue light flashes slowly.
4. Name of device
This model of bluetooth transmitter can only connected with device which is named “Music Flow
H3”. If the former 13 characters of the bluetooth receiver name is same as “Music Flow H3”, the
2 device can connect successfully.If any of the first 13 characters is not the same, the connection
will be failed.
If you need to connect with other names of devices, you have to modify the name of bluetooth
transmitter, which shoud be same as receiver device. If the receiver name is more than 13
characters, letters after 13 characters will be negligible.