Advanced Warning Systems LLC AWS-RC Manual Do Utilizador
INSYTE PRODUCT OPERATION DESCRIPTIONS
Page 5 of 8
Every RC device comes with a factory preset password. This password is in user's personal registration card. It can be
changed by user (strongly advised) immediately after user starts to use it. This is similar to InSyte device's password.
So, in the future, when user wants to change password, user must enter password to turn on RC device! This is also
similar to the InSyte device.
If user entered correct password, then the RC device will be turned on and ready for user command input. If the
password entered is not correct, then the OLED screen will display the following message:
Then, user can enter password again. The number “4” on the bottom-left corner indicate the number of tries left. Each
incorrect password input will decrease the count by 1. We only allow user to try incorrect password 4 times. This is to
prevent un-authorized person to try different password to illegally disarm the devices. If after 4 tries the password is still
not correct, then the OLED screen will display the following message:
Then the RC device will be locked. This way the un-authorized person will have no other way to use the device. Then
TRUE user must call InSyte company technical support with registration information and verifications to reset the
password or to unlock the device.
Link an InSyte device to the Remote Control device:
The COUPLE Command in the MAIN MENU is the command to perform coupling between InSyte device and remote
control, or Stealth Camera device and Remote Control device: The remote control will display the following COUPLE
menu on the OLED screen:
To add a new InSyte device to the remote control, select the “ADD INSYTE DEVICE” command and press “ ” button
on the remote control. Then the following message will be display on the OLED screen:
Now, please press the “
” key sequence on the InSyte device (see the InSyte Keypad general command section for
details).The RC device will be coupled with this InSyte device. If this InSyte device is already coupled with it, then it
will not add it in the list. If an InSyte device is NOT coupled with it, it will show that device’s ID in the list.
Command MENU System:
When the Menu button “ ” is pressed, the following screen will be displayed:
User can use the Arrow keys “
” to move the cursor to different command, and use the Enter key “ ” to select
that command. Then the RC device will display a command screen to the selected menu command.