ZyXEL SHDSL Router 791R 91-004-247008B Manual Do Utilizador

Prestige 791R G.SHDSL Router 

331 Enter PASS command 

Password: 

230 Logged in 
ftp> bin 

200 Type I OK 

ftp> get rom-0 zyxel.rom 

200 Port command okay 

150 Opening data connection for STOR ras 

226 File received OK 
ftp: 16384 bytes sent in 1.10Seconds 297.89Kbytes/sec. 

ftp> quit 

The following table describes some of the commands that you may see in GUI-based FTP clients. 

Host Address 

Enter the address of the host server. 

Login Type 

Anonymous. 

This is when a user I.D. and password is automatically supplied to the 
server for anonymous access.  Anonymous logins will work only if your 
ISP or service administrator has enabled this option. 

Normal.   

The server requires a unique User ID and Password to login. 

Transfer Type 

Transfer files in either ASCII (plain text format) or in binary mode. 

Initial Remote Directory 

Specify the default remote directory (path). 

Initial Local Directory 

Specify the default local directory (path). 

TFTP, FTP and Telnet over WAN will not work when: 

1.  You have disabled Telnet service and remote management. 

2.  You have applied a filter in menu 3.1 (LAN) or in menu 11.5 (WAN) to block Telnet service. 

3.  The IP address in the Secured Client IP field in menu 24.11 does not match the client IP. If it does not 

match, the Prestige will disconnect the Telnet session immediately. 

15-4 

  Firmware and Configuration File Maintenance