ZyXEL SHDSL Router 791R 91-004-247008B Manual Do Utilizador

Códigos do produto

91-004-247008B

Prestige 791R G.SHDSL Router

Table 15-3 General Commands for GUI-based TFTP Clients

COMMAND DESCRIPTION

Host

Enter the IP address of the Prestige. 192.168.1.1 is the Prestige’s default IP address
when shipped.

Send/Fetch

Use “Send” to upload the file to the Prestige and “Fetch” to back up the file on your
computer.

Local File

Enter the path and name of the firmware file (*.bin extension) or configuration file (*.rom
extension) on your computer.

Remote File

This is the filename on the Prestige. The filename for the firmware is “ras” and for the
configuration file, is “rom-0”.

Binary

Transfer the file in binary mode.

Abort

Stop transfer of the file.

Refer to section 15.2.5 to read about configurations that disallow TFTP and FTP over WAN.

15.2.9 Backup Via Console Port

Back up configuration via console port by following the HyperTerminal procedure shown next. Procedures
using other serial communications programs should be similar.

Step 1. Display menu 24.5 and enter “y” at the following screen.

Ready to backup Configuration via Xmodem.

Do you want to continue (y/n):

Figure 15-3 System Maintenance – Backup Configuration

Step 2. The following screen indicates that the Xmodem download has started.