ZyXEL Prestige 660HW-D1 Wireless Router 91-004-593003B Manual Do Utilizador

P-660H/HW-D Series User’s Guide

123

Chapter 7 Wireless LAN

Note: You must click Start in the AP OTIST web configurator screen and in the 

wireless client(s) Adapter screen all within three minutes (at the time of 
writing). You can start OTIST in the wireless clients and AP in any order but 
they must all be within range and have OTIST enabled.

1 In the AP, a web configurator screen pops up showing you the security settings to 

transfer. You can use the key in this screen to set up WPA-PSK encryption manually for 
non-OTIST devices in the wireless network. After reviewing the settings, click OK.

Figure 65   Security Key

2 This screen appears while OTIST settings are being transferred. It closes when the 

transfer is complete. 

• In the wireless client, you see this screen if it can't find an OTIST-enabled AP (with the 

same Setup key). Click OK to go back to the ZyXEL utility main screen.

Figure 68   No AP with OTIST Found

• If there is more than one OTIST-enabled AP within range, you see a screen asking you to 

select one AP to get settings from.

1 If you enabled OTIST in the wireless client, you see this screen each time you start the 

utility. Click Yes for it to search for an OTIST-enabled AP.

Figure 66   OTIST in Progress (AP)

Figure 67   OTIST in Progress (Client)