ZyXEL Prestige 660HW-D1 Wireless Router 91-004-593003B Manual Do Utilizador

P-660H/HW-D Series User’s Guide

Chapter 3 Wizard Setup for Internet Access

66

The following table describes the labels in this screen.

Note: The wireless stations and ZyXEL Device must use the same SSID, channel ID 

and WEP encryption key (if WEP is enabled), WPA-PSK (if WPA-PSK is 
enabled) for wireless communication.

4 This screen varies depending on the security mode you selected in the previous screen. 

Fill in the field (if available) and click Next.

Choose Manually assign a WPA-PSK key in the Wireless LAN setup screen to set up a Pre-
Shared Key.

Table 14   Wireless LAN Setup Wizard 2

Network 

Name(SSID)

Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless 

LAN. 
If you change this field on the ZyXEL Device, make sure all wireless stations use the 

same SSID in order to access the network. 

Channel 

Selection

The range of radio frequencies used by IEEE 802.11b/g wireless devices is called a 

channel. Select a channel ID that is not already in use by a neighboring device.

Security

Select Automatically assign a WPA key (Recommended) to have the ZyXEL 

Device create a pre-shared key (WPA-PSK) automatically only if your wireless clients 

support WPA and OTIST. This option is availeble only when you enable OTIST in the 

previous wizard screen.
Select Manually assign a WPA-PSK key to configure a pre-shared key (WPA-PSK). 

Choose this option only if your wireless clients support WPA. See 

 for more information.

Select Manually assign a WEP key to configure a WEP Key. See 

 for more information.

Select Disable wireless security to have no wireless LAN security configured and 

your network is accessible to any wireless networking device that is within range.

Note: If you enable OTIST in the previous wizard screen but select 

Disable wireless security here, the ZyXEL Device still creates 
a pre-shared key (WPA-PSK) automatically.

If you enable OTIST and select Manually assign a WEP key, 
the ZyXEL Device will replace the WEP key with a WPA-PSK.

Back

Click Back to display the previous screen.

Next

Click Next to proceed to the next screen. 

Exit

Click Exit to close the wizard screen without saving.