iStarUSA TC-1U30FX2 Manual Do Utilizador
Page
6
3. DC
Output
3.1 Output
Rating
Output
Nominal
Regulation
Ripple/Noise
Min
Max
1
+3.3V
±5%
50mV 0.5A 22A
2
+5V
±5%
50mV 0.5A 16A
3
+12V
±5%
120mV 1.0A 20A
4
5
5
-12V
-5V
±10%
±5%
±5%
120mV
50mV
50mV
0.0A
0.0A
0.0A
0.5A
0.3A
0.3A
6
+5VSB
±5%
50mV 0.0A 2.5A
Notes:
(1) The maximum continuous total DC outputs power shall not exceed
300
W.
(2) The maximum continuous load on +5V and +3.3V outputs shall not exceed 110W
(3) When the combined load for the +12V and +3.3V is over150w,+5V min load is 2A.
(4)
the specified DC voltage output. In either case, noise is within the frequency
range of 20MHz and specifications are rated over the full output range for the
power supply.
power supply.
Table 1. DC Output Specifications
3.2 Output
Regulation
The DC voltage outputs will stay within the regulation band as measured at the terminal
outputs due to any combination of the following conditions:
․ Input voltage fluctuations
․ Specified load range
․ Centering
․ Specified environmental conditions
․ Changing load steps
3.2.1 Output Voltage Line Regulation
The following table specifies line regulation as measured from
minimum to maximum load including the transient response
requirements as detailed in this document.
DC Nominal Output
Output Voltage Tolerance
+12V DC
±1%
+5V DC
±1%
+3.3V DC
±1%
-12V DC
±1%
+5V SB
±1%
Table 3. DC Output Tolerance Specifications