Saeco Super-automatic espresso machine HD8745/22 HD8745/22 Manual Do Utilizador
Códigos do produto
HD8745/22
ENGLISH
35
Light Signals
Causes
Solutions
Quickly fl ashing
The water circuit is empty.
Fill the water tank with fresh water and prime the water circuit as
described in Section “Using the Machine for the First Time”.
described in Section “Using the Machine for the First Time”.
Slowly fl ashing
Brew group is not inserted. Coffee ground drawer is
not inserted.
Service door is open.
Control dial is not in correct position.
not inserted.
Service door is open.
Control dial is not in correct position.
Make sure that all components have been correctly inserted and
closed. The blinking red light will now turn off .
closed. The blinking red light will now turn off .
+
Flashing in counter-
clockwise direction (cyclical)
The machine is performing the rinse/self-cleaning
cycle.
cycle.
The machine ends the rinse/self-cleaning cycle automatically.
You can interrupt the rinse/self-cleaning cycle by pressing
You can interrupt the rinse/self-cleaning cycle by pressing
“
”
either
“
”
buttons
Flashing
alternately
alternately
A fault has occurred in the brew group.
Try again to brew another espresso.
+
Flashing
simultaneously
A fault has occurred in the machine and hot water,
steam or espresso cannot be dispensed.
steam or espresso cannot be dispensed.
Turn the machine off . After 30-seconds, turn it back on.
Try this 2 or 3 times.
If the machine does NOT start, contact the Philips Saeco hotline.
Try this 2 or 3 times.
If the machine does NOT start, contact the Philips Saeco hotline.