ZyXEL Prestige 660HW-61 External 91-004-370001 Manual Do Utilizador

Prestige 660H/HW Series User’s Guide

355 

Chapter 40 Internal SPTGEN

Each parameter you enter must be preceded by one “=”sign and one space.

Some parameters are dependent on others. For example, if you disable the Configured field in 
menu 1 (see

), then you disable every field in this menu.

If you enter a parameter that is invalid in the Input column, the Prestige will not save the 
configuration and the command line will display the Field Identification Number. 

, shown next, is an example of what the Prestige displays if you enter a value 

other than “0” or “1” in the Input column of Field Identification Number 1000000 (refer 
to

Figure 233   Invalid Parameter Entered: Command Line Example

field value is not legal error:-1
ROM-t is not saved, error Line ID:10000000
reboot to get the original configuration
Bootbase Version: V2.02 | 2/22/2001 13:33:11
RAM: Size = 8192 Kbytes
FLASH: Intel 8M *2

The Prestige will display the following if you enter parameter(s) that are valid.

Figure 234   Valid Parameter Entered: Command Line Example

Please wait for the system to write SPT text file(ROM-t)...
Bootbase Version: V2.02 | 2/22/2001 13:33:11
RAM: Size = 8192 Kbytes
FLASH: Intel 8M *2

1 Launch your FTP application.

2 Enter "

bin

". The command “

bin

” sets the transfer mode to binary.

3 Get "

rom-t

" file. The command “

get

” transfers files from the Prestige to your computer. 

The name “

rom-t

” is the configuration filename on the Prestige.

4 Edit the "

rom-t

" file using a text editor (do not use a word processor). You must leave 

this FTP screen to edit.