Vogel's PFW 6870 Video wall pop-out module 7368700 Folheto

PFW 6870 

Installation Instructions 

 

Page 9

1)  Insert a small straw or toothpick into the threaded 

inserts found on the back of the flat-panel.

2)  Use a pencil to mark the depth of the threaded 

insert on the small straw or toothpick.

3)  Mark the straw or toothpick 1/8” above the depth of 

the threaded insert, as shown in Figure 1.

4)  Insert the small straw or toothpick into the remaining 

threaded inserts to compare and verify their depth 

using the straw or toothpick’s 1/8” allowance mark.

5)  Locate the correct diameter screw for the threaded 

insert. 

 If the screw you selected is longer than the 1/8” 

allowance mark on the small straw or toothpick, 

as shown in Figure 2 and Figure 3, do not use 

this screw. The screw length must not bypass the 

mark.

6)   Test each size of the screws provided.  

      The correct screws should thread easily into the 

mounting point and not pull out when tension is 

applied.

Small Straw  

or Toothpick

Small Straw  

or Toothpick

Depth Plus 1/8” Allowance

Mark

Depth Plus 1/8” Allowance

Mark

Small Straw or Toothpick

Marking the 1/8” 

Allowance