Philips HTL4115B HTL4115B/F7 Manual Do Utilizador

11

EN

Note

 

•

This product may not be compatible with certain types 

of USB storage device.

 

•

If you use a USB extension cable, USB HUB, or USB 

multi-reader, the USB storage device may not be 

recognized.

 

•

Digital camera PTP protocols are not supported.

 

•

Do not remove the USB storage device while it is 

being read.

 

•

DRM-protected music files (MP3, WMA) are not 

supported. 

 

•

Support a USB port: 5V  , 1A.

Auto standby

When playing media from a connected device, 

the Surround Base automatically switches to 

standby if:

•  no button is pressed for 30 minutes, or

•  no audio/video play from a connected 

device (except USB) for 30 minutes.

Apply factory settings

You can reset this product to the default 

settings programmed at the factory.

1 

In standby mode, press and hold   button 

on the main unit for at least 5 seconds 

until the product powers on.

6 Product 

specifications

Note

 

•

Specifications and design are subject to change without 

notice.

Amplifier

•  FTC total output power: 40 W

•  Left: 11 W (1%THD, 4 ohm, 

20 Hz - 20 kHz)

•  Right: 11 W (1%THD, 4 ohm, 

20 Hz - 20 kHz)

•  Subwoofer: 18 W (1%THD, 

4 ohm, 20 Hz - 70 Hz)

•  RMS total output power: 80 W RMS 

(+/- 0.5 dB, 10% THD)

•  Frequency response: 

20 Hz - 20 kHz / ±3 dB

•  Signal-to-noise ratio: 

> 65 dB (CCIR) / (A-weighted)

•  Input sensitivity:

•  AUX: 2 V rms

•  AUDIO IN: 1 V rms

Audio

•  S/PDIF Digital audio input:

•  Coaxial: IEC 60958-3

•  Optical: TOSLINK

USB

•  Compatibility: Hi-Speed USB (2.0)

•  Class support: USB Mass Storage Class 

(MSC)

•  File system: FAT16, FAT32, NTFS

•  Maximum memory support: < 64 GB

•  Supports MP3 and WMA file formats