Philips HTL4115B HTL4115B/F7 Manual Do Utilizador

12 EN

•  Sampling frequency:

•  MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz, 

22 kHz, 24 kHz, 32 kHz, 44.1 kHz, 

48 kHz

•  WMA: 44.1 kHz, 48 kHz 

•  Constant bit rate:

•  MP3: 8 kbps-320 kbps

•  WMA: 32 kbps-192 kbps

•  Version:

•  WMA: V7, V8, V9

Bluetooth

 • Bluetooth profiles: A2DP, AVRCP

 • Bluetooth version: 3.0 + EDR

Main unit

 • Power supply: 120V~, 60 Hz

 • Power consumption: 20 W

 • Standby power consumption: ≤ 0.5 W 

•  Speaker impedance: 4 ohm

•  Speaker drivers: 2 x racetrack mid range 

(1.5" x 5") + 2 x 1" tweeter + 1 x 4" 

woofer

 • Dimensions (WxHxD): 

701 x 68 x 325 mm / 27.6” x 2.7” x 12.8”

 • Weight: 6.5 kg / 14.3 lbs

•  Operating temperature and humidity: 

0°C to 45°C, 5% to 90% humidity for all 

climates

 • Storage temperature and humidity: 

-40°C to 70°C, 5% to 95%

Remote control batteries

•  1 x AAA-R03-1.5 V 

7 Troubleshooting

Warning

 

•

Risk of electric shock. Never remove the casing of the 

product.

To keep the warranty valid, never try to repair 

the product yourself. 

If you have problems using this product, check 

the following points before you request service. 

If you still have a problem, get support at 

www.philips.com/support. 

Main unit

The buttons on the Surround Base do not 

work.

•  Disconnect the Surround Base from the 

power supply for a few minutes, then 

reconnect.

Sound

No sound from Surround Base speakers.

•  Connect the audio cable from your 

Surround Base to your TV or other devices. 

However, you do not need a separate 

audio connection when the Surround Base 

and TV are connected through HDMI ARC 

connection.

•  Reset your Surround Base to its factory 

settings.

•  On the remote control, select the correct 

audio input.

•  Make sure that the Surround Base is not 

muted. 

Distorted sound or echo.

•  If you play audio from the TV through the 

Surround Base, make sure that the TV is 

muted.