Ubiquiti UNIFI ACCESSPOINT 3ER PACK UAP-LR-3 Manual Do Utilizador

3

Chapter 2: Installation

UniFi AP/AP-LR User Guide

 Ubiquiti Networks, Inc.

The UniFi Enterprise WiFi System is powered by the 
included PoE (Power over Ethernet) adapter. To install the 
AP, perform the following steps:
1.  Connect an Ethernet cable to the Ethernet port on the 

UniFi Enterprise WiFi System.

2.  Connect the power cord to the power port on the PoE 

Adapter. Connect the other end to of the power cord to 
a power outlet.

3.  Connect the other end of the Ethernet cable to the 

Ethernet port labeled PoE on the PoE Adapter.

Note:

 If you plan to mount the AP on your ceiling, 

perform the ceiling mount installation steps 
before connecting the Ethernet cable to the PoE 
Adapter. 

Below is an overview of the Power over Ethernet 
connections. 

The UniFi Enterprise WiFi System can be wall-mounted 
or mounted on a ceiling. Perform the steps for the 
appropriate installation:

1.  Align the Wall-Mount Bracket with the Wall Mount text 

facing up. There are horizontal and vertical lines on the 
bracket to help with orientation.

Wall Mount

Wall Mount text

 

2.  Use a pencil to mark the holes on the wall.
3.  Use a  6 mm drill bit to drill the holes in the wall.
4.  Insert the 3 M3x20 Screw Anchors into the wall.
5.  Secure the Wall-Mount Bracket to the wall by inserting 

the M2.9x20 Self Tapping Screws into the anchors.

Wall Mount