Ubiquiti UNIFI ACCESSPOINT 3ER PACK UAP-LR-3 Manual Do Utilizador
Códigos do produto
UAP-LR-3
4
Chapter 2: Installation
UniFi AP/AP-LR User Guide
Ubiquiti Networks, Inc.
6. Align the notches on the AP with the notches on the
Wall-Mount Bracket.
Wall Mount
7. Turn the AP clockwise until it locks into place.
Wall Mount
Ceiling-Mount
1. Remove the ceiling tile.
2. Align the ceiling-mount plate to the center of the top
2. Align the ceiling-mount plate to the center of the top
side of the ceiling tile.
3. Use a 3.5 mm drill bit to drill holes for the three flat
head screws.
4. Cut or drill a circle approximately 25 mm in size that
lines up with the larger circle on the Ceiling-Mount
Plate. This will be used for the Ethernet cabling.
Plate. This will be used for the Ethernet cabling.
5. Secure the Wall-Mount Bracket and Ceiling-Mount
Plateto the ceiling tile using the 3 M3x50 Flat Head
Screws and 3 M3 Keps Nuts with Tooth Washers.
Screws and 3 M3 Keps Nuts with Tooth Washers.
6. Feed the Ethernet cable through the hole and then
align the UniFi AP with the notches on the Wall-Mount
Bracket.
Bracket.
Note:
The UniFi AP supports Passive PoE, which
works with the included PoE adapter. If you want
to power the UniFi AP-Outdoor from an 802.3af
compliant switch, Ubiquiti Networks offers the
optional Instant 802.3af Adapter to instantly
transform any PoE device into a fully 48V, 802.3af
compliant product. Product details are available on
our website at http://ubnt.com/8023af
to power the UniFi AP-Outdoor from an 802.3af
compliant switch, Ubiquiti Networks offers the
optional Instant 802.3af Adapter to instantly
transform any PoE device into a fully 48V, 802.3af
compliant product. Product details are available on
our website at http://ubnt.com/8023af
7. Turn the AP clockwise until it locks into place.