Gigaset E365 E365ECO Manual Do Utilizador
Códigos do produto
E365ECO
10
First steps
Gigaset E365 / GBR / A31008-M1806-L101-1-7619 / starting.fm / 12.09.2007
Ver
si
on 4, 16.
09.20
05
Opening the battery cover
¤
If fitted, remove the belt clip.
¤
Reach into the housing cavity and pull
the battery cover upwards.
Placing the handset in the base station
and registering
Requirement: the handset must not
already be registered on any base station.
Registering the handset on the Gigaset
Registering the handset on the Gigaset
E365 base station occurs automatically.
¤
Place the handset in the charging cra-
dle of the base station with its display
facing forward.
You will hear a confirmation tone.
Automatic registration can take up to
Automatic registration can take up to
5 minutes. While registration is in
progress the screen displays
Registering
.
The handset is assigned the lowest unas-
signed internal number (1–4). If several
handsets are registered on the base, the
internal number is shown in the display
after registration, for example
2
. This
means that the handset has been
assigned the internal number 2.
¤
To charge the batteries, leave the hand-
set in the charging cradle on the
base station.
For questions and problems see page 36.
Please note:
– Automatic registration is only possible if
the base station on which you wish to reg-
ister the handset is not being used to make
a call.
– A key press cancels automatic registration.
– If four handsets are already registered on
– If four handsets are already registered on
the base station there are two options:
– The handset with the internal number 4
– The handset with the internal number 4
is in idle status: the handset you wish to
register is assigned the number 4. The
handset that was previously number 4
is de-registered.
– The handset with the internal number 4
is being used: the handset you wish to
register cannot be registered.
– If automatic registration does not work the
handset will have to be registered manually
Please note:
– The handset may only be placed in the
base/charging cradle provided for it.
– If the handset has switched itself off
because the batteries are flat and is then
placed in the base/cradle, it will switch
itself on automatically.