Kenwood TK-3501 N/A PMR Radio TK-3501E Manual Do Utilizador

8

1  Turn the Power switch/ Volume control 

clockwise to switch the transceiver power ON.

•  A beep sounds if enabled by your dealer.

2  Press the key programmed with [Monitor/ 

Monitor Momentary] or [Squelch Off/ 

Squelch Off Momentary] (Side key default) 

to hear background noise, then rotate the 

Power switch/ Volume control to adjust the 

volume.

3  Rotate the Channel selector to select your 

desired channel. Refer to the channel list.  

{p.14}

•  When you receive an appropriate signal, you 

will hear audio from the speaker.

•  If enabled by your dealer, setting the Channel 

selector to the “S” position begins Scan. Refer 

to Scan for details on how Scan operates. 

{p.17} 

4  To make a call, press and hold the PTT 

switch, then speak into the microphone using 

your normal speaking voice.

•  Hold the microphone approximately 3 to 4 cm 

(1.5 inches) from your lips.

5  Release the PTT switch to receive.

Note:  When the battery pack voltage becomes too low, transmission 

will stop and an alert tone will sound.