Kenwood TK-3501 N/A PMR Radio TK-3501E Manual Do Utilizador

10

The Time-out Timer prevent callers from using a channel for 

an extended duration. If you continuously transmit for the 

duration programmed by your dealer (default is 60 seconds), 

transmission will stop and an alert tone will sound. To stop the 

tone, release the PTT switch.

When activated by your dealer, the Battery Saver function 

decreases the amount of power used after no signal is present and 

no operations are being performed for 5 seconds. When a signal is 

received or an operation is performed, Battery Saver turns off.

Note:  While the Battery Saver is operating, the LED may flash green 

when receiving a QT/DQT signal which does not match the QT/DQT 

tone/code set up in your transceiver.

While operating the transceiver, the Low Battery Warning 

sounds an alert tone every 30 seconds and the LED indicator 

blinks red when the battery needs recharged or replaced.

When activated, BCL prevents you from interfering on a channel 

that is already in use. Pressing the PTT switch will cause an 

alert tone to sound and the transceiver will not transmit. Release 

the PTT switch to stop the tone.

Note:  Ask your dealer for an explanation on how BCL functions 

when using QT or DQT signaling.

If enabled by your dealer, when transmitting by pressing the 

PTT switch, the Proceed tone will sound.