ConiuGo 700100107 EasyGuard II 700100107 Manual Do Utilizador
Códigos do produto
700100107
24
Revision 9.0
GSM Alarm & Telemetry systems
Modify Digital Input
------------------
Name: INPIN_1
Hold time:(seconds) X
<1> Name
<2> Hold time
<0> Back
Your choice:
------------------
Name: INPIN_1
Hold time:(seconds) X
<1> Name
<2> Hold time
<0> Back
Your choice:
Here you can give a name to the dedicated input (max. 10 characters). This gives
you a better identification if you combine this input later with an action (see combina-
tion of actions and events).
E.g.: If you have a switching contact connected to the first digital input which super-
vised a window, so it makes sin to name the input „WINDOW“.
The digital inputs could use in combination with a hold time. The function of the hold
time depends on the signal which is connected to this input (0 if the digital input is
pulled to ground, 1 if the digital input is not connected to ground).
Here the function is shown in the pictures below:
In this case there is entered a hold time of 2 seconds. In case of an event the contact
will connected to ground. In this constellation the hold time works that only input
signals will be recognized which have a contact time of 2 seconds or longer. Short
signals will be ignored.