Insys GSM EASY 4.1 11-02-01-03-01.027 Manual Do Utilizador
Códigos do produto
11-02-01-03-01.027
INSYS GSM 4.2 easy
Configuration with the Software HSComm easy
January 07
33
5.7.2 System monitoring
5.7.2.1 Scheduled logout/login
Log the INSYS GSM 4.2 easy in and out for a short period every day to allow
maintenance functions of the GSM provider. Enter the logout time and the
duration (1 to 98 minutes).
The INSYS GSM 4.2 easy logs in into the GSM network again afterwards, if the PIN
of the SIM card is stored.
maintenance functions of the GSM provider. Enter the logout time and the
duration (1 to 98 minutes).
The INSYS GSM 4.2 easy logs in into the GSM network again afterwards, if the PIN
of the SIM card is stored.
5.7.2.2 Periodical logout/login with reset
In addition, a device reset can be performed for a periodic logout/login with reset.
The INSYS GSM 4.2 easy logs in into the GSM network again afterwards, if the PIN
of the SIM card is stored.
The INSYS GSM 4.2 easy logs in into the GSM network again afterwards, if the PIN
of the SIM card is stored.
5.7.2.3 Periodic alive message by SMS
The INSYS GSM 4.2 easy can send an “alive” message to the entered phone
number as SMS message, daily, weekly or monthly. The LED Status is flashing
during the dispatch.
number as SMS message, daily, weekly or monthly. The LED Status is flashing
during the dispatch.
5.7.2.4 Power up SMS
If this function is active, an SMS is sent with each power up (not Reset).
5.7.3 Date/Time
Set the real time clock date and time of the INSYS GSM 4.2 easy to a freely
selected time or to the system time of the configuration PC.
selected time or to the system time of the configuration PC.
5.7.4 Serial interface
The parameters for the serial interface depend on the model of the connected
Moeller device. The compact controllers Moeller easy 500 and 700 communicate
with 4800 bps 8N1. The compact controllers Moeller easy 800 and MFD
communicate with 9600 bps and the data format 8N1.
Moeller device. The compact controllers Moeller easy 500 and 700 communicate
with 4800 bps 8N1. The compact controllers Moeller easy 800 and MFD
communicate with 9600 bps and the data format 8N1.
It is important to set the correct speed. Even if only the easy model is
replaced (e.g. easy800 for easy500), the speed must be adjusted.
replaced (e.g. easy800 for easy500), the speed must be adjusted.