Fluke , 9 Hz thermography camera, , 80 x 80 pix bolometer matrix 4484843 Manual Do Utilizador

 

55 

To get the best performance from the lithium-ion battery, use the guidelines that 
follow: 

•  Do not store the Imager on the charger for more than 24 hours as reduced 

battery life may result. 

•  Charge the Imager for a two-hour minimum at six-month intervals for 

maximum battery life. Without use, the battery will self-discharge in 
approximately six months. Batteries stored for long periods will need two to 
ten charging cycles for full capacity. 

•  Always operate in the specified temperature range. 



  Caution 

Operating ............................................................ -10 °C to +50 °C (14 °F to 122 °F) 
Storage ............................................................... -20 °C to +50 °C (-4 °F to +122 °F) 

without batteries 

Charging ............................................................. 0 °C to 40 °C (32 °F to 104 °F) 

 .................................................. 10 to 95 % non-condensing 

 

Operating ............................................................ 2,000 m 
Storage ............................................................... 12,000 m 

 ................................................................... Color LCD, 3.5″ diagonal (Portrait 

orientation) with Backlight (selectable 

high, medium, low)