Medisana CardioCompact 51098 Guia De Informação

1. Adjust the display tilt angle in that way, that the marking of the  
    tilt mechanism 

3

 indicates “Blood pressure measurement 

    mode”. If this mode is already selected, press a button to 
    activate the blue background light - only then a blood pressure
    measurement can be started. 
2. When the blue blacklight is on, press the START-button 

6

. 

3. The unit is ready for measurement, the last measurement result
    of the seleceted user memory will be displayed and an acoustic

    signal will be emitted. The unit then inflates the cuff until suffi-
    cient pressure has built up for a measurement.
4. 

During inflation process the pressure display changes constant-

    ly. The unit slowly releases air from the cuff and carries out the

    measurement. It is possible, that the unit again inflates some air

    if the pressure is insufficient.During measurement, the pulse 
    frequency will also be measured. You may stop and leave the
    measurement process manually by pressing the START-button 
    

6

 .

When the measurement is finished, the cuff is deflated com-

    pletely. The systolic and diastolic blood pressure and the pulse   
    value with the pulse symbol  appear on the display.
    The blood pressure indicator  

8

 (

) appears above the 

    relevant coloured indicator(s) depending on the WHO blood

    pressure classification.
    If the unit detects an arrhythmia during the measuring process,
    the arrhythmia symbol          

o

 will be displayed additionally.

6. The measured values are stored automatically. Up to 500 
    measured values for each of 2 users with date and time may be 
    stored in the memory. If you want to display the saved values    
    again, press the MEM-button 

7

.

The device features an automatic switch off function. If no buttons 
are pressed for approx. 1 minute, the device automatically switches 
to standby mode. You can also switch off the display of the blood 
pressure values by pressing the START button 

6

. The time and 

the date are continuously shown on the display, as long as a power 

source (batteries and/or mains source) is present.

51098 Travel GA West AM Master.indd   42

27.09.2012   12:29:19