Medisana CardioCompact 51098 Guia De Informação

This unit features 2 separate memories 

z

 (user 1 and user 2), each

with a capacity of 500 memory slots. Results (bloodpressure values

and  pulse  with  date  and  time  and  blood  pressure  indicator)  are
automatically stored in the memory. Please follow these steps to
display the stored readings.

1. Adjust the display tilt angle in that way, that the marking of the  
    tilt mechanism 

3

 indicates “Blood pressure measurement 

    mode”. If this mode is already selected, press a button to 
    activate the blue background light - only then the stored 
    readings can be displayed. 
2. When the blue blacklight is on, select the user memory 

z

 

(1 or 

    2) first (as described in chapter 3.7 User selection) and press 
    the MEM-button 

7

 afterwards.     

3. The amount of results stored in this user memory 

s

  will  appear   

    shortly (in bottom left display area near by the “M”-symbol). 

    Then, a flashing “A” and the average value of the measure-
    ments taken in the last 7 days in the selected memory is 
    displayed for systolic and diastolic pressure and pulse.   
4. Press the MEM-button 

7

 again to display the individual 

    readings (systolic, diastolic, pulse and date/time) including the   

    blood pressure indicator and arrythmia symbol (if detected) of 
    the last measurement stored. Press the MEM-button 

7

 again 

    to move backwards through the stored readings. Together with 
    the display of the values, the corresponding memory slot 
    number appears in the bottom left display area. The stored 
    values are always shown in descending order, e.g. if 7 readings 
    are stored, firstly no. 7 (the most recent one) is displayed, then 
    no. 6 and so on.
5. Memory recall mode can be exited at any time by pressing the  
    START-button 

6

 . The unit is then switching to standby mode. 

    The unit will return to standby mode automatically after approx. 
    1 minute if no button is pressed.  
6. If all 500 memory locations in the memory are occupied, a new 
    measured value is saved whilst the oldest value is deleted.

51098 Travel GA West AM Master.indd   43

27.09.2012   12:29:19